home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19951130-19960209
/
000031_news@columbia.edu_Mon Dec 4 13:50:40 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1996-05-13
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA20608
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun>); Wed, 6 Dec 1995 04:14:57 -0500
Received: (from news@localhost) by apakabar.cc.columbia.edu (8.6.12/8.6.12) id EAA19393 for kermit.misc@watsun; Wed, 6 Dec 1995 04:14:55 -0500
Path: news.columbia.edu!sol.ctr.columbia.edu!news.msfc.nasa.gov!bcm.tmc.edu!cs.utexas.edu!news.cs.utah.edu!cc.usu.edu!jrd
From: jrd@cc.usu.edu (Joe Doupnik)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: Write-file produces continuous record
Message-Id: <1995Dec4.195040.68738@cc.usu.edu>
Date: 4 Dec 95 19:50:40 MDT
References: <Pine.ULT.3.91.951204131848.1986A-100000@chinook.halcyon.com>
Organization: Utah State University
Lines: 19
Apparently-To: kermit.misc@watsun.cc.columbia.edu
In article <Pine.ULT.3.91.951204131848.1986A-100000@chinook.halcyon.com>,
KeithM <kmhouse@halcyon.com> writes:
> Hello all:
> I'm using MS-DOS Kermit, version 3.14 on an IBM PC/AT 486/dx66 clone.
> I've written a batch file that executes a kermit script that writes several
> messages to a DOS file. These vary depending on what happens within the
> script. After the kermit script is finished and control is returned to
> the batch file, the DOS file is then written to screen. The kermit verbs
> I'm using are OPEN WRITE filename, WRITE FILE some message, WRITE FILE
> another message, CLOSE WRITE-FILE.
>
> When the file is displayed on the screen, all the lines are run together.
> Does anyone know how to write to a DOS file so that each WRITE FILE
> produces a separate line?
>
> Thanks in advance for any and all help.
--------
You add your own CR and LF's. That's \13 and \10, respectively.
Joe D.